User's Manual

Graphic-based diagnostics utilities 619
2. Network Diagnostic Tools
The Network Diagnostic Tools submenu contains the following menu
items:
• Host IP
• Number of Pings
• Maximum Hops
Use Procedure 159 “Using Network Diagnostic Tools” (page 619) to
access Network Diagnostic Tools.
Host IP Input
The Host IP list contains both preset and user-entered IP addresses. A
maximum of 16 total IP addresses are saved.
The preset IP addresses are automatically populated from the data
configured on the phone. These are:
•
S1 IP
•
S2 IP (if configured)
•
S3 IP (if configured)
•
S4 IP (if configured)
•
Gateway IP
•
Subnet mask
You can add an IP address by navigating to an existing address and
editing it. You can add minimum number of 10 IP addresses, until the list
reaches the maximum of 16 IP addresses. Your IP address is saved until
the phone reboots.
Procedure 159
Using Network Diagnostic Tools
Step Action
1 Press the Services key twice.
2 Press the right navigation key to access Diagnostics menu.
3 Press 2 on the dialpad to access the Network Diagnostic Tools
submenu.
You can press the Cancel soft key to exit the menu and return to
the Diagnostics menu.
The screen displays input fields for the Host IP, Number of Pings
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.