User's Manual

620 IP Phone diagnostic utilities

and Maximum Hops. It also has softkeys for Ping, Tracert, and

Cancel.

4 Enter a Host IP address for the Ping or Traceroute tool:

• Navigate to the Host IP field

•

Press Enter to open the list

•

Use the Up and Down navigation keys to navigate to an IP

address to use or press Enter and edit an IP address

•

Press Enter to select the IP address

Figure 109 "Network Diagnostic Tools" (page 620) shows the

Network Diagnostic Tools screen.

Figure 109

Network Diagnostic Tools

5 The number of repetitions of the Ping command is shown on the

screen. The default is 4.

To change the number of repetitions, navigate to the item, press

Enter to edit the item. Input a new value using the dialpad and

press Enter.

6 The number of hops for the Tracert command is shown on the

screen. The default is 30.

To change the number of hops, navigate to the item, press Enter

to edit the item. Input a new value using the dialpad and press

Enter.

7 Press the Ping soft key to have the IP Phone attempt to access

the IP address, up to the Number of Pings value.

The IP Phone displays the following

Pinging x.x.x.x with 64B

(where x.x.x.x is the Host IP address)

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010