User's Manual

Graphic-based diagnostics utilities 621
The IP Phone attempts to contact (ping) the address the number
of configured times, and displays the results of each attempt.
8 To stop the ping before completing, press the Stop soft key.
When finished, the phone displays the following:
• Packets transmitted (Tx)
•
Packets received (Rx)
•
Percentage of Packets Lost (Lost)
• Minimum round trip time (Min)
•
Maximum round trip time (Max)
•
Average round trip time (Average)
Figure 110 "Ping results" (page 621) shows the Output screen
for the Network Diagnostic Tools ping test.
Figure 110
Ping results
9 Use the Up and Down navigation keys to scroll the results
screen. Press the Back softkey to return to the parameter input
screen or Cancel to return to the Diagnostics menu.
10 Press the Tracert soft key to request the IP Phone to trace the
route to the Host IP address, up to the Maximum Hops node
count.
The IP Phone displays the following
Tracing route to x.x.x.x over a maximum of y hops:
(where x.x.x.x is the Host IP address and y is maximum hops
The IP Phone traces the route to the address for the configured
number of server hops, displaying the hop number (starting at 1),
the three round trip times in milliseconds, and the IP address.
When the trace is complete, the screen displays the following
Trace complete.
Figure 111 "Tracert results" (page 622) shows the Output screen
for the Network Diagnostic Tools tracert test.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.