User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

651

652

653

654

655

656

657

658

659

660

652 TFTP Server

ATTENTION

Nortel recommends that the user ends an active call before performing firmware

upgrade. Otherwise results may be unpredictable.

Procedure 169

Updating the IP Phones ﬁrmware

Step Action

1 Download the latest IP Phones firmware from the Nortel Web

site.

2 Load the latest version of the IP Phones firmware, place it on

the TFTP Server, and unzip the files. Ensure the TFTP Server

is started.

The files required are:

•

configuration file (i2033.cfg, for example)

•

firmware binary file (2310S10.bin, for example)

3 If you statically assign IP addresses, ensure that the IP address,

TFTP Server IP Address, Subnet Mask, and Default Gateway

information are accurate. If you are using a DHCP Server,

ensure the DHCP options are configured.

4 Enter the TFTP Server IP address in the Network Configuration

menu (double press of Services key, navigate left or right to

Configuration menu. Select 1Network Configuration). Using the

up/down keys, scroll to Provision field, and enter the IP address

of the TFTP Server. This field can also be configured through

DHCP.

--End--

Updating the ﬁrmware

This section describes the firmware upgrade process for the following IP

Phones:

• IP Phone 2007

• IP Phone 1110

• IP Phone 1120E

• IP Phone 1140E

• IP Phone 1150E

• IP Phone 1165E

• IP Phone 1210

• IP Phone 1220

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010