User's Manual

ManualsBrandsAvaya ManualsIP DeskphonesAvaya Communication Server 1000 IP Phones Fundamentals

651

652

653

654

655

656

657

658

659

660

654 TFTP Server

Table 146

Fields in the TFTP configuration file (cont’d.)

Field Name Field Value Descriptions

AUTO Recommended setting. The application looks

at the version and downloads the FW if it is a

newer version than what is on the phone.

DOWNLOAD_MODE

FORCED The version of firmware is ignored. The

firmware is always downloaded.

VERSION e.g. 0625C6T The version string compared to what is on the

phone. Must match exactly the FW version of

the FW pointed to by the Filename.

FILENAME 0625Cxx.bin Image file name. Must match the file name of

the actual IP Phone FW file.

PROTOCOL TFTP Download protocol. Must be TFTP.

SERVER_IP

xxx.xxx.xxx.xxx

IP Address of the TFTP server in decimal.

SERVER_PORT

0 to 65535

The port used by the server in which the phone

connects.

SECURITY_MODE

For future use.

Use Procedure 170 “Updating the firmware” (page 654) to upgrade the

firmware for the IP Phone 1110, IP Phone 1120E, IP 1140E, and IP Phone

1150E, IP Phone 1210, IP Phone 1220, IP Phone 1230 using automatic

TFTP download during bootup.

Procedure 170

Updating the ﬁrmware

Step Action

1 Use one of the three methods to configure the TFTP Server

address:

• Access the Network Configuration menu. Enter the address

at the Provision prompt. Press the Apply soft key to save the

change.

• Enter the address in the BootC menu. See “Manual TFTP

Download from BootC Procedure” (page 655).

• Enter the IP address in the TFTP IP address field retrieved

by the DHCP Server.

2 Restart the phone.

After the IP Phone boots up, it downloads its .cfg file

from the TFTP Server. After the .cfg file is retrieved, the

DOWNLOAD_MODE and VERSION fields are checked. If

necessary, the firmware file is transferred to the phone using

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010