User's Manual

658 TFTP Server
the firmware from downloading or saving properly, the Expansion Module
reverts to the factory installed firmware. This version of firmware is always
available in case the downloaded firmware is unusable.
Downloading and configuring fonts
The font files are downloaded as needed using the TFTP Server
configuration file method used by the IP Phone 2007 and IP Phones 1100
Series FW download
The IP Phone downloads the required files specified in the configuration
file, as necessary. Table 148 "Fields in the TFTP configuration file for
downloadable fonts" (page 658) describes the fields in the configuration
file on the TFTP Server for downloadable fonts. The section [FONTxx]
indicates the font file. Set the download mode to AUTO or FORCED.
Nortel recommends that you set DOWNLOAD_MODE to AUTO.
Table 148
Fields in the TFTP configuration file for downloadable fonts
Field Name Field Value Description
[FONTxx] Section header for the font file, which contains
font information, including the optional download
parameters, versions, and how to use the
font after it is downloaded. Only [FONT01] to
[FONT10] are supported.
DOWNLOAD_MODE AUTO Recommended setting. The application looks
at the version and downloads the font if it is a
newer version than the one on the phone.
FORCED The version of the font is ignored. The
configuration file is always downloaded.
PROTOCOL TFTP Download protocol. Must be TFTP.
SERVER_IP
xxx.xxx.xxx.xxx
IP Address of the TFTP server in decimal.
SERVER_PORT
0 to 65535
The port used by the server in which the phone
connects.
SECURITY_MODE
0
For future use.
FILENAME Font file name. Must match the file name of the
actual font file.
ALIAS Enables the font to have a different name in the
IP Phone file system than the one on the Call
Server.
VERSION The version string compared to what is on the
phone.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 05.06 30 April 2010
Copyright © 2003-2010 Nortel Networks. All Rights Reserved.
.