User's Manual

80 IP Phone Key Expansion Module (KEM)

Table 14

LD 11: Configure the IP Phone KEM (cont’d.)

Prompt Response Description

Applies to an IP Phone 2004 with

KEM = 2, and where <CR> was entered at the KEY

prompt.

KEY xx

Edit the IP Phone KEM key number specified by

KEMOFST, where:

xx = the number of the key (for example, KEY 36)

Enter <CR> to keep the current setting.

Installation

The IP Phone KEM mounts on the right side of an IP Phone 2002 or IP

Phone 2004. The IP Phone KEM snaps into the receptacle on the back

of the IP Phone using the desk-mount bracket and structural baseplate

supplied with the IP Phone KEM (see Figure 11 "IP Phone KEM attached

to an IP Phone 2002" (page 80)).

The IP Phone KEM connects to the IP Phone 2002 or IP Phone 2004

using the Accessory Expansion Module (AEM) port on the IP Phone.

Figure 11

IP Phone KEM attached to an IP Phone 2002

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010