User's Manual

86 Nortel IP Audio Conference Phone 2033

• Procedure 19 “Changing the TN of an existing IP Audio Conference

Phone 2033” (page 100)

• Procedure 20 “Replacing an IP Audio Conference Phone 2033” (page

100)

• Procedure 21 “Removing an IP Audio Conference Phone 2033 from

service” (page 101)

If power to the phone is interrupted after you install and configure an IP

phone, you are not required to reenter the IP Parameters, Node Numbers,

or Terminal Number (TN). There is also no need to again acquire the

firmware.

Description

The IP Audio Conference Phone 2033 uses the customer IP data network

to communicate with the Communication Server 1000 (CS 1000). The

IP Audio Conference Phone 2033 translates voice into data packets for

transport using Internet Protocol. Use a Dynamic Host Configuration

Protocol (DHCP) server to provide information that you can use for the IP

Audio Conference Phone 2033 network and CS 1000 connections.

Figure 12 "IP Audio Conference Phone 2033" (page 87) shows the IP

Audio Conference Phone 2033.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010