User's Manual

Installation and configuration 95

Table 19

Components list for EMEA (cont’d.)

Table 20 "Power cords" (page 95) lists the IP Audio Conference Phone

2033 power cords.

Table 20

Power cords

IP Audio Conference Phone 2033 power cords

NA NEMA 5-15P, 125V 13A (10ft.) NTTK14AB

Euro CEE (7) VII, 250V, 10A (2.5m) NTTK16AB

ANZ AS3112, 250V 10A (2.5m) NTTK15AA

Swiss SEV 1011, 250V 10A (8ft.) NTTK17AB

UK/Ireland BS1363, 240V 10A (8ft.) NTTK18AB

Denmark AFSNIT, 250V 10A (2.5m) NTTK22AB

Argentina IRAM 2073, 250V 10A (8ft.) A0814961

Japan 1.8 m (5.9 ft), 10 amp, IEC320-C13 NTTK26AAE6

Installation and conﬁguration

The following sections provide a step-by-step guide to install and configure

the IP Audio Conference Phone 2033:

• “Before you begin” (page 95)

•

“First-time installation” (page 96)

• “Configuring the IP Audio Conference Phone 2033” (page 96)

•

“Connecting the components” (page 97)

•

“Startup sequence” (page 99)

Before you begin

Before installing the IP Audio Conference Phone 2033, complete the

following pre-installation checklist:

• Ensure one Software License exists for each IP Audio Conference

2033 Phone you install.

• Ensure one IP Audio Conference Phone 2033 boxed package exists

for each IP Audio Conference Phone 2033 you install. See Table

18 "Components list for US, CA, CALA, AP, and GC" (page 93) or

Table 19 "Components list for EMEA" (page 94) for a list of package

contents.

• Ensure the host Call Server is equipped with a Signaling Server that

runs the Line TPS application.

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010