User's Manual

Redeploying an IP Audio Conference Phone 2033 99

Figure 17

Bottom view of IP Audio Conference Phone 2033

--End--

When you complete the IP Phone connection, you must connect the phone

to the network. See “Dynamic Host Configuration Protocol” (page 424).

Startup sequence

When an IP Audio Conference Phone 2033 connects to the network, it

must perform a startup sequence. The elements of the startup sequence

include:

• obtaining network access (if supported by the network infrastructure)

• obtaining VLAN ID (if supported by the network infrastructure)

• obtaining the IP parameters

• connecting to the Call Server

• obtaining provisioning parameters

For information about provisioning the IP Phone, see “Manual provisioning

of IP Phones 2000 Series” (page 551).

Redeploying an IP Audio Conference Phone 2033

You can redeploy an existing previously configured IP Audio Conference

Phone 2033 on the same system. For example, the IP Audio Conference

Phone 2033 can be assigned to a new user (new TN) or to an existing

user who moved to a new subnet by changing the TN of the IP Audio

Conference Phone 2033. For further information, see Converging the Data

Network with VoIP Fundamentals (NN43001-260).

Nortel Communication Server 1000

IP Phones Fundamentals

NN43001-368 05.06 30 April 2010