Offsite Agent Telephone System User Guide

Chapter 5 Admin Terminal Commands
Page 5-38 Version 4.0 CPSEE_TSP500 User Guide
This document is confidential and proprietary to SER Solutions and is not for external use.
Examples:
span 34 m Place span 34 in maintenance mode.
span 34 o Place layer 2 for span 34 “out-of-service.”
span 34 i Place layer 2 for span 34 “in-service.”
SPSTUFF (sp)
Displays a variety of information regarding the specified station.
This command can also be entered with a “d” option to display hex dump
information related to the station.
Examples:
sp 34 Display information about station 34.
sp 34 d Display a hex dump of station 34.
SRESET
Force a drop of the Digital Station Trunk associated with the specified sta-
tion(s).
Syntax:
sreset <station number or range> <Insert Caution
message associated with TRESET command>
STATUS (st)
Displays Campaign Status on a specified Campaign.
The syntax is: status <campaign #>
Table 5-25: SPAN Command
CMD Function
m Place specified ISDN span in Maintenance mode.
i Place specified ISDN span In-Service.
o Place specified ISDN span Out-of-Service.
Note:
Not all ISDN protocols sup-
port the above commands.