User's Manual
Table Of Contents
- New in this release
- Nortel DECT Messenger Administrator Guide
- Preface
- Nortel DECT Messenger overview
- eCONFIG
- Adding a DECT device to the Messenger system
- DECT Messenger Customer Engineer Manual
- Preface
- DECT Messenger overview
- DECT Messenger in a WAN or MAN network
- Licensing
- Detailed module descriptions
- What is required to run DECT Messenger
- DATABASES in DECT Messenger
- Installing and getting started
- Using eCONFIG
- Using eTM
- eDMSAPI Inbound
- eLOCATION
- Connecting National Instruments modules
- Understanding Security features
- Using eBackup
- Setting up e-mail integration (eSMTP_Server/eSMTP)
- Using eSMTP Server
- Using eSMTP
- Sending SMS messages
- V.24 - RS232 connections (eCAP, eESPA)
- Using Import/Export menu
- eLOG
- Checking diagnostics
Connecting National Instruments modules 127
4 Configure the comm resource
In the Comm Resources Configuration window, set the following:
• Name
Accept the default name (FP Res).
• Port
This is the COM port on your computer to which you have
connected your V.24 interface from the FieldPoint FP-1000
module.
• Baud Rate
Communication speed over the V.24 line. Default this is 115200
b/s. The DIP switch settings associated with the speed are
displayed. Ensure that the DIP switches for the Baud rate on the
FP-1000 module are in the same position as displayed in your
screen. The DIP switches on the FP-1000 module are under a
small cover on the top of the FP-1000 module.
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.