User's Manual
Table Of Contents
- New in this release
- Nortel DECT Messenger Administrator Guide
- Preface
- Nortel DECT Messenger overview
- eCONFIG
- Adding a DECT device to the Messenger system
- DECT Messenger Customer Engineer Manual
- Preface
- DECT Messenger overview
- DECT Messenger in a WAN or MAN network
- Licensing
- Detailed module descriptions
- What is required to run DECT Messenger
- DATABASES in DECT Messenger
- Installing and getting started
- Using eCONFIG
- Using eTM
- eDMSAPI Inbound
- eLOCATION
- Connecting National Instruments modules
- Understanding Security features
- Using eBackup
- Setting up e-mail integration (eSMTP_Server/eSMTP)
- Using eSMTP Server
- Using eSMTP
- Sending SMS messages
- V.24 - RS232 connections (eCAP, eESPA)
- Using Import/Export menu
- eLOG
- Checking diagnostics
128 DECT Messenger Customer Engineer Manual
• Time-out (msec.)
Time out counter on the V.24 communication. Accept the default
(200 msec).
Note: Do not close this window yet; proceed to the next step.
5 Search for connected modules
• Click Find Devices
This scans the FieldPoint Module address through the V.24
interface, and automatically detects that modules are connected.
Click this button if you are sure that all the other settings in this
window are correct.
The following window is displayed.
6 Expand the communication name.
After all the devices are detected, they are displayed in the left
pane. If not, click the + sign in front of the communication name
(FP Res by default).
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.