User's Manual

146 DECT Messenger Customer Engineer Manual
• In the Windows Components window, check the check box
Internet Information Services.
•
Click Next.
• Insert the Windows CD-ROM after the system asks for it.
--End--
Note:
After installing IIS, you must reinstall Windows 2000 Service
Pack 4.
Configuring eSMTP_Server in eConfig
You can use the default settings for the eSMTP_Server module in
eCONFIG.
You must create a Group Name for each e-mail address you wish to
associate with DECT Messenger. Each group must contain the destination
device to which messages must be sent.
For example: A user wishes to send a message from their e-mail client to
the DECT handset owned by Security1. The following steps are required:
Procedure 22
Sending an e-mail message to a DECT handset
Step Action
1 Assuming DECT Messenger has a domain name configured
as messenger.com, create a group within the eSMTP_Server
module called [e-mail].
2 Within this group add the eDMSAPI device 04#32, which is a
DECT handset owned by Security1.
--End--
Configuring IIS for DECT Messenger
The IIS must be configured to work with DECT Messenger. Use the
following procedure to configure IIS for DECT Messenger.
Procedure 23
Configure IIS for DECT Messenger
Step Action
1 Open the Internet Services Manager (IIS).
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.