User's Manual
Table Of Contents
- New in this release
- Nortel DECT Messenger Administrator Guide
- Preface
- Nortel DECT Messenger overview
- eCONFIG
- Adding a DECT device to the Messenger system
- DECT Messenger Customer Engineer Manual
- Preface
- DECT Messenger overview
- DECT Messenger in a WAN or MAN network
- Licensing
- Detailed module descriptions
- What is required to run DECT Messenger
- DATABASES in DECT Messenger
- Installing and getting started
- Using eCONFIG
- Using eTM
- eDMSAPI Inbound
- eLOCATION
- Connecting National Instruments modules
- Understanding Security features
- Using eBackup
- Setting up e-mail integration (eSMTP_Server/eSMTP)
- Using eSMTP Server
- Using eSMTP
- Sending SMS messages
- V.24 - RS232 connections (eCAP, eESPA)
- Using Import/Export menu
- eLOG
- Checking diagnostics
162 DECT Messenger Customer Engineer Manual
— Alarm Length as specified in the Alarm ID definitions.
If the Alarm Length is set to 10 characters, only the first 10
characters of the original message are regarded as relevant and
the remaining characters are stripped off.
—
Message Format as specified in the eVBVoice Settings of the
Alarm ID in eCONFIG.
The Message Format allows conversion of the original message.
•
MESSAGE Original
This is the original message, as it came from the Input Program.
• ALARM id
The ALARM id is the unique alarm identifier for processing the input
request. This Alarm Identifier, contains parameters on how the alarm
must be processed.
•
ALARM Prty
Alarm Priority as specified in the Alarm Record for this Input Request.
• ALARM Description
Alarm description that is associated with the ALARM id in the Alarm
Record for this input. Depending on the Input Program type, it provides
either the ALARM id or the description.
•
ALARM Remove After
An Input Program provides the Remove After parameter. It indicates
whether the alarm request must stay active until a reset is received
from the input program or not.
•
GROUP id
The Group id is the Group Identifier that is provided by the Input
Program for an Alarm. In the eKernel, these groups contain one or
more Group Members.
•
GROUP Description
The Group Description is a recognizable name for the group, and is
associated with the Group id. It is not used for processing the alarm, it
is for administrative purposes only.
• DEVICE id
Not yet implemented.
• DEVICE area
Not yet implemented.
• DEVICE Outpgm
Not yet implemented.
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.