User's Manual
Table Of Contents
- New in this release
- Nortel DECT Messenger Administrator Guide
- Preface
- Nortel DECT Messenger overview
- eCONFIG
- Adding a DECT device to the Messenger system
- DECT Messenger Customer Engineer Manual
- Preface
- DECT Messenger overview
- DECT Messenger in a WAN or MAN network
- Licensing
- Detailed module descriptions
- What is required to run DECT Messenger
- DATABASES in DECT Messenger
- Installing and getting started
- Using eCONFIG
- Using eTM
- eDMSAPI Inbound
- eLOCATION
- Connecting National Instruments modules
- Understanding Security features
- Using eBackup
- Setting up e-mail integration (eSMTP_Server/eSMTP)
- Using eSMTP Server
- Using eSMTP
- Sending SMS messages
- V.24 - RS232 connections (eCAP, eESPA)
- Using Import/Export menu
- eLOG
- Checking diagnostics
172 DECT Messenger Customer Engineer Manual
• <type>DI</type>
This tag indicates the type of message, which indicates that the
message was generated by the Digital Input contact.
• <module>02</module>
This tag specifies from which module the message comes. In Figure
53 "IO Module log file" (page 171), the message comes from the
second module.
• <contact>01</contact>
This tag indicates the contact on the IO module.
•
<sts>1</sts>
This tag indicates the contact status. 1 means that the contact was
activated.
In the file shown in Figure 53 "IO Module log file" (page 171), the following
messages have been exchanged between the eIO module and the
eKERNEL for each line:
1. 18/11/2002 11:53:04 - O:TCP:<xml><msgrqs>type>DI</ type><module
>02</module><contact>01</contact><sts>1</sts></msgrqs></xml>
An outgoing message request from eIO to eKERNEL. Contact 01 on
module 02 has been activated. (The input module is type DI.)
2.
18/11/2002 11:53:05 - O:TCP:<xml><msgrqs><type>DI</ type><modul
e>02</module><contact>01</contact><sts>0</sts></msgrqs></xml>
An outgoing message request from eIO to eKERNEL. Contact 01 on
module 02 has been de-activated. (The input module is type DI.)
3.
18/11/2002 11:53:06 - I:TCP<:xml><msgrqs><id>00431</
id><site>1</site>module>03</module><contact>01</
contact><sts>1</sts><reset_delay>3</reset_delay></msgrqs></xml>
An incoming message request in eIO from eKERNEL. Command
to activate contact 01 on module 03 for a time period of 3 seconds.
(Message identifier 00431.)
4. 18/11/2002 11:53:06 - O:TCP:<xml><msgrpy><id>00431</ id><module
>03</module><contact>01</contact><sts>ACK</sts></msgrpy></xml>
An outgoing message reply from eIO to eKERNEL as an acknowledge
(ACK) on message request in line 3. (Message identifier 00431.)
5. 18/11/2002 11:53:06 - I:TCP:<xml><msgrqs><module>03</
module><contact>01</contact><sts>0</sts><reset_delay>0</
reset_delay></msgrqs></xml>
An incoming message in eIO from eKERNEL to reset the contact 01 in
module 03.
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.