User's Manual
Table Of Contents
- New in this release
- Nortel DECT Messenger Administrator Guide
- Preface
- Nortel DECT Messenger overview
- eCONFIG
- Adding a DECT device to the Messenger system
- DECT Messenger Customer Engineer Manual
- Preface
- DECT Messenger overview
- DECT Messenger in a WAN or MAN network
- Licensing
- Detailed module descriptions
- What is required to run DECT Messenger
- DATABASES in DECT Messenger
- Installing and getting started
- Using eCONFIG
- Using eTM
- eDMSAPI Inbound
- eLOCATION
- Connecting National Instruments modules
- Understanding Security features
- Using eBackup
- Setting up e-mail integration (eSMTP_Server/eSMTP)
- Using eSMTP Server
- Using eSMTP
- Sending SMS messages
- V.24 - RS232 connections (eCAP, eESPA)
- Using Import/Export menu
- eLOG
- Checking diagnostics
eCONFIG 25
Figure 6
eCONFIG main window
Note: The contents of the eCONFIG window are different for each
user or for each system configuration. “eCONFIG main window” (page
24) shows all the menu items that are possible.
The following menu items are available:
• Import/Export menu: provides the option to import configuration data
into tables in the configuration database, or to export configuration data
from the configuration database tables. The file type is .csv.
Note: Do not use the Import/Export menu items if you do not have
detailed configuration database knowledge. If you make mistakes, it
can corrupt your system.
•
License information: provides information about the current licenses
that are active in your DECT Messenger. You cannot make license
changes from this menu.
• Site Site 1: indicates the location of the eKERNEL (core) software.
There is typically only one eKERNEL in a system, so there is only one
site displayed. (In exceptional cases, there can be more than one site,
but only one eKERNEL (that is, one site) can be active at any given
instant.
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.