User's Manual

Table Of Contents

eCONFIG 31

Device parameters

As in previous sections, you can specify the following parameters for a

device:

• Output Program

This field specifies the output program that processes a request.

A device can be defined in more than one module. The indicated

application threads the message using the capabilities of the

infrastructure. The eDMSAPI can, for example, send E2 messages

(non-voice-call to extensions such as DECT C4050 and C4060). The

supported output programs are currently:

—

eASYNC for sending SMS to PROXIMUS, or KPN and PAGING to

BELGACOM.

— eDMSAPI for sending E2 messages to DECT handsets that

support E2 (LRMS).

— eESPA for sending messages to an ESPA 4.4.4 interface (pager

equipment).

—

eIO for enabling/disabling discrete output contacts.

— eSMTP for sending e-mail to an e-mail provider.

Note 1:

The output program is associated with a Site ID (which is

typically 1) and an Area ID. If there is more than one entry of the

same output program, each one can have a different area. Select

the correct area.

Note 2:

Selecting the output program is only possible when you

create a new device. Always use the

Browse button to select the

output program. Figure 7 "Select Output Program browser window"

(page 32) shows the browser window.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 01.06

17 October 2008