User's Manual

Table Of Contents

34 Nortel DECT Messenger Administrator Guide

Table 6

Example device IDs

DMC Card installed in

Device ID

2nd slot on Main Cabinet on CS1000M, handset is

subscribed with index 01

02#01

7th slot of shelf 0 on CS1000E, handset is

subscribed with index 123

08#123

14th slot of shelf 1 on CS1000E, handset is

subscribed with index 03

31#03

• Output program facility

The indicated application threads the message using the capabilities

of the output device. The display of extensions can differ in character

length, and so on. Therefore, DECT Messenger must know to which

device type the message is being sent (for example, C4050 or 4060

for eDMSAPI).

Use the Browse button to select the correct output program facility.

Figure 8 "Device Select Facility" (page 34) shows the selection window

for the eDMSAPI.

Figure 8

Device Select Facility

• Description

The Description field is used to enter a description of the device. The

description is used to show information about the devices in the web

interface (for example, DECT: John Peterson).

• Pincode

The pincode is used to confirm messages using the eDMSAPI (IC).

Confirmation means that an active alarm on the device is reset from

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 01.06

17 October 2008