User's Manual

38 Nortel DECT Messenger Administrator Guide
• A red bullet before an item indicates that the parameter is
mandatory.
•
Some items contain default parameter values.
• Nortel recommends that you use the Browse option, when
present, to define a location, rather than typing an entry.
Note 1: The group name that you enter must match the group
name entered for the input module. If the input module is
an eAPI, eCAP, or eESPA, the group name matches that in
the external system. Therefore, you must know the external
system that delivers the group name.
Note 2: The input module provides not only a group name,
but also an alarm. Ensure that the alarm from the input
module corresponds to an alarm in the alarms list. Ask a
system specialist if you are uncertain about this.
The parameters are described in more detail in “Group
parameters” (page 40).
4 Confirm your choices.
Click OK and follow the instructions on the screen, if applicable.
--End--
Changing group parameters
Complete the following steps to change group parameters.
Procedure 5
Changing group parameters
Step Action
1 Open eCONFIG.
2 Select the input module for which you want to change the group
parameters.
Select the input module for which you want to change group
parameters from the Modules menu.
Note: A group is always associated with an input module.
However, to change group parameters, you can also select a
group from the Groups and Devices menu.
3 Open the group.
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.