User's Manual

eCONFIG 41
paging number, group, or destination. In most cases, the group names
are determined by third-party vendors and cannot be changed.
Note:
You can use the same group name for more than one
input program. You can use the same group name because the
DECT Messenger software adds the input program ID to the group
name, which makes the group ID unique. This group ID is created
automatically after you create the group. However, you can change
the group name later. The Group ID remains the same.
•
Description
Administrators can easily recognize the group (for example, Intensive
Care) by reading the descriptive text in the Description field.
•
Comments
The Comments field contains additional information. For example,
"Warning: minimum three DECT extensions required".
•
Input program
The Input program parameter provides information about the input
program. You cannot change this parameter. After you create a
new group for an input program, these parameters are assigned
automatically.
•
Group members
Use the Group members parameter to assign group members to
the group (assign devices to the group from the list of devices). After
assigned, these devices become group members. If the device (for
example, an extension) that you want to assign is not in the list, create
that device first according to the procedures “Creating a new device”
(page 27).
Use the Group members menu to open the window shown in Figure 9
"Group members window" (page 42).
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.