User's Manual
Table Of Contents
- New in this release
- Nortel DECT Messenger Administrator Guide
- Preface
- Nortel DECT Messenger overview
- eCONFIG
- Adding a DECT device to the Messenger system
- DECT Messenger Customer Engineer Manual
- Preface
- DECT Messenger overview
- DECT Messenger in a WAN or MAN network
- Licensing
- Detailed module descriptions
- What is required to run DECT Messenger
- DATABASES in DECT Messenger
- Installing and getting started
- Using eCONFIG
- Using eTM
- eDMSAPI Inbound
- eLOCATION
- Connecting National Instruments modules
- Understanding Security features
- Using eBackup
- Setting up e-mail integration (eSMTP_Server/eSMTP)
- Using eSMTP Server
- Using eSMTP
- Sending SMS messages
- V.24 - RS232 connections (eCAP, eESPA)
- Using Import/Export menu
- eLOG
- Checking diagnostics
46 Nortel DECT Messenger Administrator Guide
• Click the Device ID menu item.
• Use the Browse button to select the device that you want to
add as a member to the group.
Note: After you select a device, the area and output program
are defined automatically for the member.
For more information on the parameters, see “Member
parameters” (page 48).
5 Confirm your choices.
Click OK and follow the instructions on the screen, if applicable.
--End--
Changing group member parameters
Complete the following steps to change the parameters for a group
member.
Procedure 7
Changing group member parameters
Step Action
1 Open the Group members window.
Follow Steps 1, 2, and 3 in “Assigning a new member to a group”
(page 43).
2 Select the group member to edit.
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.