User's Manual

eCONFIG 47
In the right panel of the window is a list of one or more group
members that are assigned to the group. Select the group
member that you want to edit, and click
Edit.
3 Change the parameters.
A window, similar to the one in Step 4 of “Assigning a new
member to a group” (page 43), opens, however all parameters
are entered.
•
Click the item you want to change.
Note: You can change all parameters except the group ID
and the parameters for device ID.
4 Confirm your choices.
Click OK and follow the instructions on the screen, if applicable.
--End--
Removing a group member
Complete the following steps to remove a member from a group.
Procedure 8
Removing a group member
Step Action
1 Open the Group members window.
Follow Steps 1, 2, and 3 in “Assigning a new member to a group”
(page 43).
2 Select the group member to remove.
In the right panel of the window is a list of one or more group
members that are assigned to the group. Select the group
member that you want to edit, and click Edit.
3 Remove the member from the group.
A window, similar to the one in Step 4 of “Assigning a new
member to a group” (page 43), opens, however all parameters
are entered.
• Remove the member by clicking the Delete button.
4 Confirm your choices.
Click OK and follow the instructions on the screen, if applicable.
--End--
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.