User's Manual
Table Of Contents
- New in this release
- Nortel DECT Messenger Administrator Guide
- Preface
- Nortel DECT Messenger overview
- eCONFIG
- Adding a DECT device to the Messenger system
- DECT Messenger Customer Engineer Manual
- Preface
- DECT Messenger overview
- DECT Messenger in a WAN or MAN network
- Licensing
- Detailed module descriptions
- What is required to run DECT Messenger
- DATABASES in DECT Messenger
- Installing and getting started
- Using eCONFIG
- Using eTM
- eDMSAPI Inbound
- eLOCATION
- Connecting National Instruments modules
- Understanding Security features
- Using eBackup
- Setting up e-mail integration (eSMTP_Server/eSMTP)
- Using eSMTP Server
- Using eSMTP
- Sending SMS messages
- V.24 - RS232 connections (eCAP, eESPA)
- Using Import/Export menu
- eLOG
- Checking diagnostics
50 Nortel DECT Messenger Administrator Guide
Procedure 9
Create a new user
Step Action
1 Open eCONFIG.
2 Expand the All Users menu.
Note: Two submenu items are listed: eWEB and eCONFIG.
eWEB contains the users for eWEB, while eCONFIG contains
the users for eCONFIG. These are separate from each other,
however the approach and authority mechanism is the same,
so the steps in this section apply to both.
3 Access the pop-up menu.
In the All users menu, right-click either eCONFIG or eWEB.
4 Create a new user.
Depending on the option you chose in step 3, select one of the
following:
• New eConfig User
• New eWEB User
5 Enter the parameters for the new user.
Select each item in the left panel and enter parameters.
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.