User's Manual
Table Of Contents
- New in this release
- Nortel DECT Messenger Administrator Guide
- Preface
- Nortel DECT Messenger overview
- eCONFIG
- Adding a DECT device to the Messenger system
- DECT Messenger Customer Engineer Manual
- Preface
- DECT Messenger overview
- DECT Messenger in a WAN or MAN network
- Licensing
- Detailed module descriptions
- What is required to run DECT Messenger
- DATABASES in DECT Messenger
- Installing and getting started
- Using eCONFIG
- Using eTM
- eDMSAPI Inbound
- eLOCATION
- Connecting National Instruments modules
- Understanding Security features
- Using eBackup
- Setting up e-mail integration (eSMTP_Server/eSMTP)
- Using eSMTP Server
- Using eSMTP
- Sending SMS messages
- V.24 - RS232 connections (eCAP, eESPA)
- Using Import/Export menu
- eLOG
- Checking diagnostics
eCONFIG 51
The parameters are explained in “User parameters” (page 53).
6 Confirm your choices.
Click OK and follow the instructions on the screen, if applicable.
--End--
Changing user properties
The following procedure describes how to change the properties for user.
Procedure 10
Changing user properties
Step Action
1 Open the Group Members window.
2 Expand the All Users menu.
Two menu items are available: eWEB and eCONFIG. eWEB
contains the users for eWEB and eCONFIG contains the users
for eCONFIG. These are separate from each other, however the
approach and authority mechanism is the same, so the steps in
this section apply to both.
3 Select the menu item that contains the user you want to edit.
Select either eCONFIG or eWEB, depending on where the user
resides. A list of users opens in the right panel.
4 Open the Properties window for the user you want to edit.
Double-click the user for which you want to change the
properties.
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.