User's Manual
Table Of Contents
- New in this release
- Nortel DECT Messenger Administrator Guide
- Preface
- Nortel DECT Messenger overview
- eCONFIG
- Adding a DECT device to the Messenger system
- DECT Messenger Customer Engineer Manual
- Preface
- DECT Messenger overview
- DECT Messenger in a WAN or MAN network
- Licensing
- Detailed module descriptions
- What is required to run DECT Messenger
- DATABASES in DECT Messenger
- Installing and getting started
- Using eCONFIG
- Using eTM
- eDMSAPI Inbound
- eLOCATION
- Connecting National Instruments modules
- Understanding Security features
- Using eBackup
- Setting up e-mail integration (eSMTP_Server/eSMTP)
- Using eSMTP Server
- Using eSMTP
- Sending SMS messages
- V.24 - RS232 connections (eCAP, eESPA)
- Using Import/Export menu
- eLOG
- Checking diagnostics
52 Nortel DECT Messenger Administrator Guide
5 Change the parameters.
Change the parameters by clicking the item and changing the
field contents.
The parameters are explained in “User parameters” (page 53).
6 Confirm your choices.
Click OK and follow the instructions on the screen, if applicable.
--End--
Deleting a user
The following procedure describes how to delete a user.
Procedure 11
Deleting a user
Step Action
1 Open the User Properties window.
Follow Steps 1, 2, 3, and 4 of the procedure in “Changing user
properties” (page 51).
2 Delete the user.
Click the Delete button.
3 Confirm your choices.
Click OK and follow the instructions on the screen, if applicable.
--End--
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.