User's Manual
Table Of Contents
- New in this release
- Nortel DECT Messenger Administrator Guide
- Preface
- Nortel DECT Messenger overview
- eCONFIG
- Adding a DECT device to the Messenger system
- DECT Messenger Customer Engineer Manual
- Preface
- DECT Messenger overview
- DECT Messenger in a WAN or MAN network
- Licensing
- Detailed module descriptions
- What is required to run DECT Messenger
- DATABASES in DECT Messenger
- Installing and getting started
- Using eCONFIG
- Using eTM
- eDMSAPI Inbound
- eLOCATION
- Connecting National Instruments modules
- Understanding Security features
- Using eBackup
- Setting up e-mail integration (eSMTP_Server/eSMTP)
- Using eSMTP Server
- Using eSMTP
- Sending SMS messages
- V.24 - RS232 connections (eCAP, eESPA)
- Using Import/Export menu
- eLOG
- Checking diagnostics
56 Nortel DECT Messenger Administrator Guide
Procedure 12
Adding a DECT device to the Messenger system
Step Action
1 Configure a device format.
Ensure that you have a Device Format for this type of DECT
handset. For information about configuring device formats,
refer to
DECT Messenger Installation and Commissioning
(NN43120-301).
Browse to Groups and Devices > Device Format. If your
DECT Handset is configured under Device Format on the
eConfig module, your DECT handset type is shown beside the
eDMSAPI output program.
2 Add new Device.
Within Groups and Devices, right click All Devices, and choose
New Device.
3 Configure the new device.
Make the following configuration changes:
• Select eDMSAPI as the Output program.
• For Device ID, enter either:
Board_Number#Index_Number if you are configuring
traditional DECT handsets
OR
a DN if you are configuring SIP DECT handsets.
Example: For a DMC Card in Slot 4 of an Option 11c
Cabinet, and a DECT handset subscribed to index 2, the
Device ID is 04#02.
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.