User's Manual
Table Of Contents
- New in this release
- Nortel DECT Messenger Administrator Guide
- Preface
- Nortel DECT Messenger overview
- eCONFIG
- Adding a DECT device to the Messenger system
- DECT Messenger Customer Engineer Manual
- Preface
- DECT Messenger overview
- DECT Messenger in a WAN or MAN network
- Licensing
- Detailed module descriptions
- What is required to run DECT Messenger
- DATABASES in DECT Messenger
- Installing and getting started
- Using eCONFIG
- Using eTM
- eDMSAPI Inbound
- eLOCATION
- Connecting National Instruments modules
- Understanding Security features
- Using eBackup
- Setting up e-mail integration (eSMTP_Server/eSMTP)
- Using eSMTP Server
- Using eSMTP
- Sending SMS messages
- V.24 - RS232 connections (eCAP, eESPA)
- Using Import/Export menu
- eLOG
- Checking diagnostics
58 Nortel DECT Messenger Administrator Guide
• Group Members. Click New. Browse under Device_ID for the
device you created in Step 2.
•
Group Authority. Click New. Under User_ID browse for *ALL
7 Open the Inbound data call handling menu.
• In eConfig, open the menu Modules, and expand the
eDMSAPI module by clicking the + beside it. Under the
eDMSAPI module, the instances of the input module (For
example, eDMSAPI - area One) are listed.
• Right-click the instance of the eDMSAPI module (For
example, eDMSAPI - area One), and click Open in the
pop-up menu.
•
Scroll to the bottom of the menu and expand Inbound
data-call handling.
• 3 choices are displayed:
— Inbound
— Inbound Event
— Inbound Result
8 Configure Inbound data call handling.
Make the following configuration changes for Inbound:
• Click New
• Called Device: Enter the DN of the DECT handset
• Called type: *IA
Make the following configuration changes for Inbound Event:
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.