User's Manual

68 DECT Messenger Customer Engineer Manual
Table 7
Incoming and outgoing modules (cont’d.)
Module Name Function Incoming
Outgoing
eSMTP (client) Sending e-mail messages
-
Yes
eDMSAPI Sending and receiving LRMS
(E2) DECT messages using the
CSTA interface.
Yes,
receiving
LRMS
(E2) DECT
messages
Yes,
sending
LRMS
(E2) DECT
messages
eASYNC Asynchronous modem interface
to cell phone SMS provider, or
to wide area paging system.
-
Yes
eLOCATION Always in combination with
eCSTA or eDMSAPI; after
location alarm is triggered, the
location of the DECT handset
is detected. This information is
available in the message that is
generated.
Yes No
eVBVOICE Interactive Voice Responds
used to various message
types. Only available through
Professional Services!
Yes Yes
eSNMP Receive an SNMPv1 or
SNMPv2c trap from an SNMP
sending process or equipment.
Yes No
eSMS Send SMS message to a mobile
phone. Inbound SMS can be
used to confirm alarm.
Yes No
Security modules
The security modules are used (in addition to an operating system) to
provide extra security. Security provided is based on the module type. The
following gives a brief overview of the available security modules:
• eBACKUP
The eBACKUP module creates a backup of the configuration database
at regular intervals.
• eGUARDIAN
The eGUARDIAN module is used in conjunction with an input module
that receives data at regular intervals. The eGUARDIAN module
checks the data input at regular intervals. If the input is not received
within a specified time period, the eGUARDIAN module sends a
message indicating that an input is down.
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.