User's Manual
Table Of Contents
- New in this release
- Nortel DECT Messenger Administrator Guide
- Preface
- Nortel DECT Messenger overview
- eCONFIG
- Adding a DECT device to the Messenger system
- DECT Messenger Customer Engineer Manual
- Preface
- DECT Messenger overview
- DECT Messenger in a WAN or MAN network
- Licensing
- Detailed module descriptions
- What is required to run DECT Messenger
- DATABASES in DECT Messenger
- Installing and getting started
- Using eCONFIG
- Using eTM
- eDMSAPI Inbound
- eLOCATION
- Connecting National Instruments modules
- Understanding Security features
- Using eBackup
- Setting up e-mail integration (eSMTP_Server/eSMTP)
- Using eSMTP Server
- Using eSMTP
- Sending SMS messages
- V.24 - RS232 connections (eCAP, eESPA)
- Using Import/Export menu
- eLOG
- Checking diagnostics
What is required to run DECT Messenger 85
— Work with devices
—
Work with facilities
•
Expert maintenance
— Import Template configuration
Refer to Module - Web Administrator User Guide in DECT Messenger
Installation and Commissioning (NN43120-301) for more information.
What is required to run DECT Messenger
Hardware Requirements
The hardware requirements for DECT Messenger are grouped into
mandatory requirements and optional requirements. The optional
requirements depend mainly on the number of modules and users, and
the type of modules.
• Mandatory PC Requirements
—
Intel
®
Pentium
®
4 processor, 1.8 GHz.
—
256K cache 256MB SDRAM.
— 10/100 MB Network interface card.
—
3.5 Floppy Drive.
—
10 GB free Hard disk space.
—
CD-ROM player.
•
Optional PC requirements
—
Analogue Modem for remote maintenance/support.
—
Analogue Modem for dialling to GSM provider to send SMS
messages. Only required if you must send SMS messages to a
GSM (cell phone) provider using a dial-in option.
— Internal Serial Watchdog (type 1120 from Berkshire Products,
www.berkprod.com).
—
National Instruments equipment for Digital input, Digital output
(contacts), and analogue input options (for software module eIO).
See the chapter dealing with National Instruments products in
DECT Messenger Installation and Commissioning (NN43120-301)
for more information.
— V.24 multi port card.
Software Requirements
DECT Messenger works with the following required and optional software:
• Required software
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 01.06
17 October 2008
Copyright © 2003–2008 Nortel Networks
.