User's Manual

276 Table: eESPA

This parameter is only relevant if eESPA acts as an input program (so

receives external data from the espa infrastructure.

If the specified data identifier is not present in the available datastream

record, than the field eESPA_Msg_default_str must be used to define a

default message.

If the eESPA module acts as input program: The received espa record

must be translated to a valid message request, and sent to the eKERNEL

application.

This field specifies the Data Identifier (normally 2) of the espa record that

specifies the message.

In this authorized, data identifier 2 (display message) is defined as

eESPA_DataId_Msg_str.

Table 16

Espa record: SOH1STX1US12345RS2USThe messageRS3US9RS4US3RS6U

S3ETXBCC

(SOH) Start of header

STX Start of text

ETX End of text

US Unit separator

RS Record separator

BCC Checksum

The incoming alarm/message, must be translated to a valid message

request and sent to the eKERNEL:

Figure 207

Example: eESPA module acts as input program

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010