User's Manual

289

Table: eIO_MODULE

eIO_modules parameters

eIOM_Site_id_n

This field specifies the site identifier, as defined in eKERNEL_SITE table.

In most environments, this value is 1.

An authorized of an entry typically found in this field is as follows: 1

eIOM_Area_id_n

This field specifies the area identifier, as defined in eKERNEL_AREA

table. In most environments, this value is 1.

An authorized of an entry typically found in this field is as follows: 1

eIOM_Module_str

This value refers to the 2-byte module identifier, specified in the FieldPoint

Explorer and in eIO_MODULE table. A typical value is between 01 and 08.

Ensure that the table eIO_DO defines only digital output-contacts (those

with a matching digital output module). The current release supports up

to eight modules per eIO instance, including one FP-1000 controlling

module, and can refer to FP-AI-100, DP-DI-300, FP-DI-301, FP-DI-330

and FP-DO-401.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 2

NN43120-301 02.01 4 June 2010