Quick Reference Guide

Issue 2 April 1997

Basic Operation

Figure 3. DXS Selector Console

The following list items correspond with the callouts shown in Figure 1, Figure 2,

and Figure 3. All the feature buttons, trunk access buttons, and display buttons

are on this console. The DXS Selector Console allows you to dial a room

number and view the busy, occupied, and maid status for each room

1. Display Buttons — These eight buttons are used to control access to the

alphanumeric display.

2. Call Processing Area — This area consists of the dial keypad, some fixed

status lamps, and the , , and buttons. You use the

button to get an idle call appearance to place a call, the

button to cancel a dialing instruction, and the button to end a call.

3. Handset — This is a standard handset with coiled cord and a dual-prong,

phone-plug connector. The handset can be unplugged from the console

and replaced with an amplified headset that also uses a dual-prong,

phone-plug connector.

11) DXS Hundreds Group

Select Buttons

12) DXS/BLF Buttons

Start Cancel

Release

Start Cancel

Release