Quick Reference Guide

Issue 2 April 1997

Call Purpose Indicators

The trunk group select buttons have three status lamps associated with each

button.

■

Control

— This lamp is on if the trunk group has controlled restrictions

administered.

■

Warning

— This lamp is on when some trunks are busy. Select an

alternate trunk group if possible, or use this group if necessary.

■

Busy

— This lamp is on when all the trunks in a trunk group are busy.

You must select another trunk group or try again later.

Call Purpose Indicators

The following is a list of call purpose indicators that are displayed when calls are

redirected to the attendant console or to a backup voice terminal:

■

b or B — Busy. Indicates that the called guest is busy and the call is

redirected by Call Coverage.

■

co — Controlled Outward Restriction Call. Indicates that a guest

attempted to make an outgoing call, but the room has Outward

Restriction applied.

■

cs — Controlled Station-to-Station Restriction Call. Indicates that a guest

attempted to make a call to another guest room, but the room has

Station-to-Station Restriction applied.

■

ct — Controlled Termination Restriction Call. Indicates that a guest or an

outside caller attempted to make a call to a guest room, but the called

room has Termination Restriction applied.

■

d — Don’t Answer or Cover. Indicates that the guest did not answer the

telephone, and the call is redirected to the attendant through Call

Coverage.

■

f — Call Forwarding. Indicates that a call has been redirected using Call

Forwarding.

■

ic — Intercept Treatment. Indicates that an incoming call has been

redirected as a result of intercept treatment.