Quick Reference Guide

Issue 2 April 1997
15
Basic Operation
Make Calls
You can make calls to rooms using the normal dial keypad or using the DXS
selector console. To make outside calls, you can use the normal dial keypad or
the trunk group select buttons.
To make calls to rooms using the selector console, do the following (use room
number 7062 as an example):
1. At the selector console, press the hundreds group select button that is
marked . This button controls all rooms that start with 70.
2. Press the button in the DXS/BLF button field.
■ A call appearance lamp goes on.
■ The
Position Available
lamp goes off.
■ You hear a ringback tone.
■ The display shows the dialed number.
■ The ringback tone stops when the called party answers.
3. To end the call, press the button.
■ You are disconnected from the call.
■ The call appearance lamp goes off.
■ The display goes blank.
■ The
Position Available
lamp goes on.
■ The console returns to the normal operating mode.
NOTE:
Before the call completes, you can press the or
button to end the call attempt. If you press , you get another
dial tone. If you press , the console returns to the normal
operating mode.
7000
62
Release
Cancel
Release
Cancel
Release