Quick Reference Guide

16
Issue 2 April 1997
Make Calls
To make calls to rooms not using the selector console, do the following:
1. Press the button or an idle call appearance button.
■ You hear a dial tone.
■ The call appearance lamp goes on.
■ The
Position Available
lamp goes off.
2. Dial the room number.
■ You hear a ringback tone.
■ The display shows the dialed number.
■ The ringback tone stops when the called party answers.
3. To end the call, press the button.
■ You are disconnected from the call.
■ The call appearance lamp goes off.
■ The display goes blank.
■ The
Position Available
lamp goes on.
■ The console returns to the normal operating mode.
NOTE:
Before the call completes, you can press the or
button to end the call attempt. If you press , you get another
dial tone. If you press , the console returns to the normal
operating mode.
Start
Release
Cancel
Release
Cancel
Release