Quick Reference Guide

Issue 2 April 1997
17
Basic Operation
Making a call to an outside number requires an outgoing trunk. You can access
an outgoing trunk in two different ways:
■ You can make a call to an outside number by dialing a code for the
Automatic Route Selection feature or a specific trunk group,
or
■ You can make a call to an outside number by pressing the trunk group
select button for the desired trunk.
NOTE:
Trunk group select buttons are not available at some locations. If
the trunk group select buttons are not administered, dial the trunk
access codes using the dial keypad.
To make a call to an outside number, do the following:
1. Do one of the following:
a. Press the button or an idle call appearance button.
■ You hear a dial tone.
■ The call appearance lamp goes on.
■ The
Position Available
lamp goes off.
b. Press a trunk group select button. Continue with Step 3.
■ The call appearance lamp goes on.
■ The
Position Available
lamp goes off.
■ The trunk group select
Busy
lamp goes on.
2. Dial the trunk access code or dial the Automatic Route Selection feature
access code.
Start