Quick Reference Guide

18
Issue 2 April 1997
Forced Release
3. Listen for the call progress tones. If you hear:
■ Dial tone, this is a valid trunk access code. Continue with Step 4.
■ Busy or reorder tone, this indicates that there are no outgoing
trunks available. Press the button and redial, or press the
button and try again later.
■ Intercept tone, this is an invalid code. Press the button and
redial, or press the button and try again later.
4. Dial the outside number, and listen for call progress tones. If you hear:
■ Ringback tone and the call is answered, go to Step 5. If the call is
not answered, press the button and redial, or press the
button and try again later.
■ Busy tone or intercept tone, the call cannot be completed as
dialed; press the button and redial, or press the
button and try again later.
5. To end the call, press the button.
■ You are disconnected from the call.
■ The call appearance lamp goes off.
■ The display goes blank.
■ The
Position Available
lamp goes on.
■ The console returns to the normal operating mode.
Forced Release
While making calls and answering calls, you can get in a situation where you
cannot cancel or release a call. If this happens, use the button.
This will disconnect you from the current call and return the console to normal
operating mode. Use this feature only when necessary.
Cancel
Release
Cancel
Release
Cancel
Release
Cancel
Release
Release
Forced Release