Quick Reference Guide

Issue 2 April 1997
21
Basic Operation
2. Dial the number for the person to whom you may transfer the call.
■ You hear a ringback tone.
■ The display shows the number you are calling.
3. After the person answers, press the button to alternate
between the original call and the new call.
■ The lamp goes on and will stay on as long as you
alternate between calls.
4. Use
one of the following steps, a, b, c, or d, to complete the call.
a. To set up a 3-way connection, press the button.
■ You and the other two callers are connected.
■ The lamp goes on.
■ The display shows a conference call in progress.
■ The lamp goes off and the button can no longer
be used for this call.
To drop out of the 3-way connection, press .
■ You are disconnected from the call.
■ The lamp goes off.
■ The call appearance lamp goes off.
■ The display goes blank.
■ The
Position Available
lamp goes on.
■ The console returns to the normal operating mode.
Split Swap
Split Swap
Split
Split
Split Swap
Release
Split