Quick Reference Guide

Issue 2 April 1997
25
Basic Operation
Class of Restriction
When guests request that you place long-distance or even local calls, you
should check their assigned class of restriction (COR) before you complete the
call. If they are not restricted from certain calls, you may complete the call for
them.
To check on a guest’s COR, do the following:
1. While on an active call, press the button.
■ The lamp goes on.
■ The display shows the guest’s COR value (a two-digit code) and a
four-character restriction identifier, such as:
The COR call restriction identifiers are the following:
■ ORIG — Origination restriction; calls of any type are not allowed
from that extension.
■ OTWD — Outward Restriction; calls to numbers outside of the
property are not allowed from that extension.
■ TOLL — Toll Restriction; toll calls are not allowed from that
extension.
■ NONE — No restrictions are active for that extension.
2. Follow local procedures for handling calls from restricted extensions.
Class (COR)
Class (COR)
a=01 NONE