Quick Reference Guide

Issue 2 April 1997

Call Park

■ The

Position Available

lamp goes on.

■ The console returns to the normal operating mode.

Call Park

The Call Park feature allows you to put a call on hold and then retrieve the call

from any other voice terminal within the system. Calls can be parked using the

attendant console or any voice terminal that does not have a “client room” COS.

To use Call Park from the attendant console, do the following:

1. While on an active call, press the button.

■ You hear a dial tone.

■ The lamp goes on.

2. Dial the Call Park feature access code _____, or press the

button.

■ You hear a dial tone.

3. Dial one of the administered Call Park extensions. These extensions are

designated for use for parking calls only.

■ You hear a confirmation tone.

4. Press .

To pick up a parked call, do the following:

1. Dial the Answer Back feature access code _____ at the attendant

console or from any voice terminal or telephone that does not have the

“client room” COS.

■ You hear a dial tone.

2. Dial the extension number where the call was parked.

■ You are connected to the parked call.

Start

Split

Call Park

Release