Quick Reference Guide

Issue 2 April 1997

Feature Operation

To use Loudspeaker Paging with trunk access codes, do the following:

1. Press the button or an idle call appearance button.

■ You hear a dial tone.

■ The call appearance lamp goes on.

■ The

Position Available

lamp goes off.

2. Dial the trunk access code for the zone you wish to page.

■ If you hear confirmation tone, continue with Step 3.

■ If you hear busy tone, the zone is not available; press and

try again later.

3. Speak into the handset to make the announcement.

■ The announcement was heard in the selected zone(s). If the

announcement lasted too long, you will hear intercept tone; try

again with a shorter announcement.

4. Press .

Start

Cancel

Release