Quick Reference Guide

Issue 2 April 1997
47
Feature Operation
Serial Calling
The Serial Calling feature allows incoming trunk calls that you have transferred
to a guest room to automatically recall the console after the guest hangs up. You
can then transfer the call to another guest room.
To use the Serial Calling feature, do the following:
1. Answer the call the same way you would answer any other incoming call.
2. Press the button.
■ The lamp goes on.
3. Press the button.
■ You hear a dial tone.
■ The lamp goes off.
■ The lamp goes on.
4. Dial the number for the person to whom you want to transfer the call.
■ You hear a ringback tone.
■ The display shows the room number you are calling.
5. Press the button as soon as the call starts ringing.
■ The calling person is connected to the ringing phone line.
■ You are disconnected from the call.
■ The lamp goes off.
■ The call appearance lamp goes off.
■ The display goes blank.
■ The
Position Available
lamp goes on.
■ The console returns to the normal operating mode.
Serial Call
Serial Call
Start
Serial Call
Split
Release
Split