Quick Reference Guide

48
Issue 2 April 1997
Serial Calling
6. When the called person hangs up on the calling person, the calling
person is automatically routed back to the console.
■ You hear a 1-burst repetitive ring.
■ The display identifies the incoming call as a serial call:
■ The
Position Available
lamp goes off.
■ The call appearance lamp flashes.
7. Answer the recall.
■ You are reconnected to the caller.
■ The call appearance lamp stops flashing, but remains on.
■ The lamp goes on.
8. Transfer the caller to the next person by repeating Steps 3 through 5.
The Serial Call feature remains activated until the trunk drops from the switch or
you cancel the feature manually by pressing the button.
a= co to front desk sc
Serial Call
Serial Call