Quick Reference Guide

50
Issue 2 April 1997
Transfer
To transfer a call, do the following:
1. Answer the incoming call. Tell the calling person that you are going to
transfer their call.
2. Press the button.
■ You hear a dial tone.
■ The lamp goes on.
3. Dial the number for the person to whom you want to transfer the call.
■ You hear a ringback tone.
■ The display shows the room number you are calling.
4. Use
one of the following steps, a, b, c, or d, to complete the call.
a. To transfer the call, press the button as soon as the call
starts ringing.
■ The calling person is connected to the ringing phone line.
■ You are disconnected from the call.
■ The lamp goes off.
■ The call appearance lamp goes off.
■ The display goes blank.
■ The
Position Available
lamp goes on.
■ The console returns to the normal operating mode.
b. If you want to announce the call, wait for the called person to
answer. If the called person accepts the call, press the
button.
■ The calling person is connected to the called person.
■ You are disconnected from the call.
■ The lamp goes off.
■ The call appearance lamp goes off.
Start
Split
Release
Split
Release
Split