User's Manual

176 System configuration
• “Subscribe a multi site DECT handset” (page 176)
• “Import and export subscriptions” (page 177)
• “Configure NRS for multi site mobility network” (page 178)
•
“Call server configuration to MSMN” (page 179)
• “Configuration of Personal Call Assistant” (page 182)
• “Configuration of Universal Extension (UEXT) on the remote system”
(page 182)
Subscribe a multi site DECT handset
Use the following procedure to subscribe a multi site DECT handset.
Procedure 84
Subscribing a multi site DECT handset
Step Action
1 Open Internet Explorer and enter the following URL in the
address field: localhost/cds.
The DAP manager IP DECT page appears.
2 In the navigation menu, select Pack Up & Go.
3 Select the multi site subscriptions check box.
4 Enter PARI and SARI of the target system
5 Click OK.
6 Enter the number range to define DNs for multi site DECT
handsets, for example from 5010 to 5020.
7 Select the required available extension number(s), for example
5010. If the required number is not visible, select another page.
The page number is displayed in the top and bottom rows of the
subscriptions table.
8 Click Enable for Multi-Site. The status of the configuring
subscription record changes from "Free" to "Enabled" and
the Personal Identification Number (PIN) is shown. A PIN is
generated by the DECT manager on each subscribe operation
and only shows while the subscription status is enabled.
9 Take a DECT handset and navigate to the System
configuration menu.
10 Choose New and enter the displayed PIN code.
Sometimes you need to enter the PARK code first. The
PARK code is displayed on the left at the bottom of the
Subscriptions page. If the PIN is not entered within 16 minutes,
the subscription mode is terminated for that specific extension
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.