User's Manual

90 Site planning

Procedure 24

Calculating the data for all remaining cells

Step Action

1 Repeat the last four tasks to calculate all the remaining user cell

estimates.

2 Enter the result in the estimate table.

The information in Figure 49 "Example of dividing the coverage

area and recording offices" (page 85), is shown entered into

Table 14 "Example of a completed estimate table" (page 89).

This table is used to note the results of the calculations for cells

that require reengineering.

--End--

Creating a table to document telephone types in a cell

Use a table like Table 15 "Telephone types in a cell" (page 90) to record

the different telephone types in each cell.

Table 15

Telephone types in a cell

Telephone type

1C1 1C2 1C3 1Cn

User telephone types

Use the following symbols in each cell to denote the type of telephones

in use in the cell.

• H&W for a cell in which all the users have both wired and handsets

(wireless phones).

•

H for a cell in which users have only handsets (wireless phones).

•

M for a mix of H and H&W users

Procedure 25

Creating a table to document telephone types in a cell

Step Action

1 Make a Telephone types table.

2 Label the row, User telephone types and include as many

columns as there are cell centers.

3 Label each column heading with the cell center indicator.

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 01.07

6 January 2009