Operation Manual

Configuring Layer2 QoS settings
About this task
Use the following procedure to set the VLAN parameters.
Procedure
1. Press Menu > Config > Layer2 QoS.
2. Enter the required values for each VALN parameter.
Related links
Administering through the deskphone on page 14
Layer2 QoS field descriptions
Name Description
802.1Q/VLAN Tag The VLAN tag for the Layer2 QoS packets.
priority value The priority value for the Layer2 QoS packets.
Reset Vlan Config The option to reset the VLAN tag value.
Related links
Administering through the deskphone on page 14
Configuring the network settings
About this task
Use the following procedure to configure network parameters, such as the IP mode and the
Gateway IP address.
Procedure
1. Press Menu > Network Config.
2. Enter the required value for each network parameter.
3. Select Back, and press Menu.
4. To immediately bring into effect the updated values, press Reboot , else press No.
Related links
Administering through the deskphone on page 14
Configuring Layer2 QoS settings
January 2016 Administering Avaya E129 SIP Deskphone 17
Comments on this document? [e-mail]