Operation Manual

Configuring the call features settings
Procedure
1. Click Settings > Call Features.
The system displays the Call Features page.
2. Enter the required details for each field.
3. Click Save.
Related links
Administering through the Web GUI on page 19
Call features settings field descriptions
Name Description
Off-hook Auto Dial Specifies the number that the deskphone dials when
the deskphone is off-hook.
Off-hook Timeout Specifies the time in seconds after which the
deskphone goes on-hook after being off-hook. You
can specify any value in the range of 10 to 60.
Disable Call Waiting Specifies whether to disable the call waiting feature.
Disable Call Waiting Tone Specifies whether to disable the call waiting tone
when the Call Waiting feature is active.
Use Quick IP Call Mode Specifies whether the user can dial an IP address
under the same LAN or VPN segment by entering
the last octet in the IP address.
Note:
Avaya E129 SIP Deskphone does not support
this parameter.
Disable in-call DTMF Display Specifies whether the deskphone displays the DTMF
digits that the user enters during a call.
Enable Sending DTMF via Speed Dial Specifies whether to enable Speed Dial Key to send
DTMF during a call.
In-call Dial Number on Pressing Transfer Key Specifies the number that the deskphone dials as
DTMF when the user presses the Transfer button.
Auto-Attended Transfer Specifies whether the deskphone uses the attended
transfer by default.
Do Not Escape '#' as %23 in SIP URI Specifies whether the deskphone replaces # by %23
for some special situations.
Table continues…
Managing the deskphone settings
January 2016 Administering Avaya E129 SIP Deskphone 33
Comments on this document? [e-mail]