Operation Manual

Name Description
DNS Server 1 Specifies the first DNS server.
DNS Server 2 Specifies the second DNS server.
Preferred DNS Server Specifies the preferred DNS server.
Related links
Administering through the Web GUI on page 19
Configuring the network advanced settings
Procedure
1. Click Network > Advanced Settings.
The system displays the Advanced Settings page.
2. Enter the required details for each field.
3. Click Save.
Related links
Administering through the Web GUI on page 19
Network advanced settings field descriptions
Name
Description
802.1X Mode Specifies whether to enable the 802.1X mode.
Supports only EAP-MD5.
802.1X Identity Specifies the 802.1X mode.
MD5 Password Specifies the MD5 password.
HTTP Proxy Specifies the HTTP proxy URL where the phone
sends the packets. The proxy server is an
intermediary to route the packets to the destination.
HTTPS Proxy Specifies the HTTPS proxy URL where the phone
sends the packets. The proxy server is an
intermediary to route the packets to the destination.
Layer 3 QoS Specifies the Layer 3 QoS parameter. This value is
used for IP Precedence, Diff-Serv, or MPLS.
Layer 2 QoS 802.1Q/VLAN Tag Specifies the VLAN tag of the Layer 2 QoS packets.
Layer 2 QoS 802.1p Priority Value Specifies the priority value of the Layer 2 QoS
packets. You can specify any value in the range of 0
to 7.
Table continues…
Managing the network settings
January 2016 Administering Avaya E129 SIP Deskphone 41
Comments on this document? [e-mail]